Insulated Personnel & Double Doors, Plugs & Hatches

All our insulated doors are manufactured with 38mm thick PIR core as standard (alternative core insulation types are available if required).

Our door support channel is designed to encapsulate the raw cut edges of the insulation panel for maximum engineered strength.

On manufacture of the door blade core, galvanised steel plates are located into the relevant fixing locations of the door furniture. In addition to the galvanised plate, an insert is located internally along all four outer edges of the door core to provide a firm fix for the outer anodised channel.

Additional Features:
As with all of our doors, there are options on additional features.

• 5-bar aluminium or stainless steel kick plates
• Door Closers
• Vision Panels (Chill or Ambient Locations - polycarbonate)
• Fire exits
• Redlan bolt system
• Push pads

Insulated Slam Face, Manual and Auto Sliding Doors, Plugs & Hatches.

All above insulated doors are manufactured with 100mm thick PIR core as standard (alternative core insulation types are available if required) The anodised aluminium door channel encapsulates the insulation material to maximise the structural strength.

All mitred corner sections have internal angle to the inside face to enable mechanical fixings to hold them together. The fixings are engineered rivnuts with stainless steel socket button screws holding the channel together.

Gaskets are held in place by the retaining insert and fixed with stainless steel domehead screws During the process of manufacturing, a galvanised steel plate is inserted into the panel behind the handle location, and foamed into position. The internal handle/push release is then secured through the panel to the galvanised steel plate with engineered rivnuts.

Additional Features:
As with all of our doors, there are options on additional features.

• 5-bar aluminium or stainless steel kick plates
• Door Closers
• Vision Panels (Chill or Ambient Locations - polycarbonate)
• Fire exits
• Redlan bolt system
• Push pads